Vetrimec (Ivermectin) Pour-On for Cattle, 1 Liter

Cannot Be Sold & Shipped to Residents in California

Vetrimec (Ivermectin) Pour-On for Cattle delivers internal and external parasite control for cattle in one convenient, low-volume application. Indicated for effective control of gastrointestinal roundworms, lungworms, cattle grubs, lice, mites and horn flies. Do not use in female dairy cattle of breeding age or calves to be processed for veal. Meat withdrawal: 48 days. Apply along the animal's topline in a narrow strip extending from the withers to the tailhead.

Indications

Vetrimec Pour-On applied at the recommended dose level of 500 mcg/kg is indicated for the effective control of these parasites.

• Gastrointestinal Roundworms
• Lungworms
• Cattle Grubs
• Mites
• Lice
• Horn Flies

Dosage:

The dose rate is 1 mL for each 22 lb of body weight. The formulation should be applied along the topline in a narrow strip extending from the withers to the tailhead.

Administration:

Collapsible Packs (33.8 fl oz/1 liter pack; 84.5 fl oz/2.5 liter pack; 169 fl oz/5 liter pack with dosing gun/applicator)

Because of the solvents used in Vetrimec Pour-On, the applicator gun from Simcro Tech, or equivalent, is recommended. Other applicators may exhibit compatibility problems resulting in locking, incorrect dosage or leakage. Remove the shipping cap from the backpack container and replace with the vent cap provided. Attach the hose from the automatic dosing equipment to the outlet from the vent cap. Follow the applicator gun manufacturer's directions for priming the gun, adjusting the dose, and care of the applicator gun following use.

Container (676 fl oz/20 liter container with draw-off device and dosing gun/applicator)

Because of the solvents used in Vetrimec Pour-On, the draw-off device and applicator gun from Simcro Tech, or equivalent, is recommended. Other applicators may exhibit compatibility problems resulting in locking, incorrect dosage or leakage. Screw Feedlot pack cap and dip tube onto the 20 liter drum ensuring a tight fit. Connect the long 3m feed tube at one end to the spigot on the Feedlot pack cap and the other end to the applicator gun. Then follow the applicator gun manufacturer's directions for priming the gun, adjusting the dose, and care of the applicator gun following use.

When the interval between use of the applicator gun is expected to exceed 12 hours, disconnect the gun, draw off tubing and dip tub and cap from the product container, empty the product from the gun and tubing back into the container and replace the shipping cap.