Bovi-Bond Rubber Block, 0.75", Each

Bovi-Bond Rubber Block is a type of hoof block used for treating lameness in cattle. It is made of rubber and is designed to provide comfort and traction on wet or slippery surfaces. The block is bonded to the cow's hoof using a special adhesive.

Here are some of the key things to know about Bovi-Bond Rubber Blocks:

• They are used to treat lameness in cattle. Lameness is a general term for any condition that causes a cow to limp or walk with difficulty. There are many different causes of lameness, but some of the most common include hoof infections, sole ulcers, and white line disease.
• They provide comfort and traction. The rubber block is designed to cushion the cow's hoof and reduce pain. It also provides traction on wet or slippery surfaces, which can help to prevent the cow from slipping and falling.
• They are bonded to the cow's hoof with a special adhesive. The adhesive is strong and durable, and it will hold the block in place for several weeks.
• They are available in different sizes and thicknesses. The size and thickness of the block will depend on the severity of the lameness and the size of the cow.

If you are considering using Bovi-Bond Rubber Blocks to treat lameness in your cattle, it is important to talk to your veterinarian first. They can help you to determine if this is the right treatment for your cows and can also show you how to apply the blocks correctly.

Here are some additional things to keep in mind about Bovi-Bond Rubber Blocks:

• They can be expensive.
• They can be difficult to apply.
• They may not be effective for all cases of lameness.

Overall, Bovi-Bond Rubber Blocks can be a helpful tool for treating lameness in cattle. However, it is important to talk to your veterinarian before using them to make sure that they are the right treatment for your cows.

Using Bovi-Bond Rubber Blocks effectively requires careful preparation and proper technique. Here's a step-by-step guide:

Before you begin:

1. Gather your supplies: You'll need Bovi-Bond Rubber Blocks, Bovi-Bond Adhesive, mixing tips, a rasp, hoof knife, cleaning solution, gloves, and a heat gun (optional).
2. Restrain the cow: Safely secure the cow in a comfortable and accessible position to work on its hooves.
3. Prepare the hoof: Clean the affected hoof thoroughly with the cleaning solution and remove any dirt, debris, or loose tissue. Use the rasp and hoof knife to trim and shape the hoof for better block adhesion.

Applying the Bovi-Bond Rubber Block:

1. Dispense the adhesive: Apply a continuous strip of adhesive about 15mm wide directly onto the block using the mixing tip. The exact amount may vary depending on the hoof size and shape.
2. Warm the block (optional): For colder weather, briefly heat the block with the heat gun for around 10 seconds to improve adhesion.
3. Place and press the block: Immediately position the block onto the clean, dry hoof, aligning it correctly with the affected area. Gently but firmly press the block for 20 seconds to ensure good contact.
4. Hold and maintain: Keep the hoof off the ground for an additional minute to allow the adhesive to set properly. If needed, use your hand or another block to support the hoof during this time.
5. Remove the tip: Discard the used mixing tip and replace it with a new one for future use.

Tips for success:

• Practice: Consider practicing on non-affected hooves before working on a lame cow.
• Temperature: Work in a warm environment or keep the adhesive and blocks warm for optimal bonding.
• Avoid over-adhesive: Don't use too much adhesive; a 2-3mm gap between the block and hoof is acceptable.
• Monitor the block: Regularly check the block for any signs of loosening or damage.
• Seek professional help: If you're unsure about any aspect of the process, consult a veterinarian or experienced hoof trimmer.

Remember, it's crucial to consult with a veterinarian or experienced cattle caretaker before attempting to use Bovi-Bond Wood Blocks on your own, especially if the hoof injury is severe or complex. They can provide proper guidance and ensure the treatment is appropriate for your specific situation.